Color steel tile press installation method and working process

Color steel tile press installation method and working process
Features of color steel tile press: the equipment has the advantages of operation, maintenance, maintenance and mechanical debugging, and easy mold replacement of color steel tile press; the entire unit automation control system adopts a highly integrated network, which makes the automation system superior in performance; The steel tile press adopts high-level automatic control software to realize production information management.
The mold used by the color steel tile pressing machine needs an upper mold and six lower molds of the same size. Install the upper mold and one lower mold first. The lower mold is directly installed on the six-square runner table, and the upper mold is installed on the bottom of the slide. On the color steel tile press and place a backing plate of appropriate thickness to ensure that after the upper and lower molds are closed, the gap around the periphery is uniform, and the distance between the upper and lower molds is equal to the thickness of the required tile blank. Then the upper mold shall prevail, the workbench shall be transposed, and the remaining five sets of lower molds shall be installed. Automatic feeding and billet taking working procedure: mold installation and host test run are the same as above, color steel tile press and then open air compressor, vacuum pump, extruder, tile cutter, unloading machine, tile press, host and tile holder When the conveyor is stopped, stop the extruder first, and then stop other equipment.
The color steel tile press machine manually puts billets and takes billets. Before using the color steel tile press machine, check whether the connections are secure, whether the installation bolts and nuts are tightened, and lubricating oil should be added to the left and right chassis before the machine can be powered on. Carry out a test run, first run the color steel tile press empty and carefully observe, whether there is vibration, noise, whether the oil window is oily, whether the movement of each part is coordinated, the color steel tile press is normal before the mold can be installed, and the color steel tile press is installed When the mould, cut off the power supply, manually move the motor belt or large gear, the color steel tile press machine will rotate the worktable, and make the sliding seat rise to the highest point, it is best to use an object to support the workbench and Between the bottom surfaces of the sliding seat, the anti-slip seat will fall naturally, causing accidents.