How to deal with deviation of color steel tile press plate

How to deal with deviation of color steel tile press plate

The color steel tile press will inevitably have problems of one kind or another during the production process. The more common problem is the deviation of the color steel plate. Once deviation occurs, it will affect the production efficiency and product qualification rate of the machine, so we must We know how to correct these mistakes. After a long period of research and exploration, we came up with a method to adjust this problem: If the equipment board runs to the right, we need to use an iron block to pad the left corner, or move the right roller To flatten, whichever axis is out of alignment should be flattened. The upper roller should be consistent with the lower roller. If the upper roller is flattened, the lower roller should also be flattened. Uniform and symmetrical rollers cannot be changed. If it still doesn’t work, first adjust the two equal corners of the front and rear rows of the color steel tile press from the main frame to the upper end of the bottom shaft at the same height, find a line to straighten, and check whether the bottom shaft is in a straight line. On the horizontal line, adjust the left and right sides of the lower axis to be horizontal.
The remedial method for the misalignment of the color steel tile press plate requires our long-term production and testing. Different misalignment directions have different remedial methods, but one thing to note is that whether it is the mechanical roller or other parts, it needs Align both sides. Only by aligning both sides can we maintain symmetry and the shape of the product will be regular.