How to maintain health with a tile press

How to maintain health with a tile press

How to use the tile press can be used for a long time. The first thing we have to do is to remember the maintenance manual of the tile press. How to do it every day is good for the tile press, so we should stick to it every day.
First of all, the surface of the tile press must be cleaned. The machine’s upper die stamping process: the motor drives the input shaft through the pulley, through the pinion and the large gear, drives the upper shaft, and drives the sliding seat equipped with the upper die through a set of cam mechanisms. Move up and down to achieve tile pressing.
submit
The indexing positioning of the worktable is achieved by a gear set installed at the end of the upper shaft, a driving pin gear, and a sheave wheel installed on the hexagonal runner shaft. There are two sets of gears installed at both ends of the upper shaft of the tile press. A return cam that is mounted on the same axis as the conjugate cam of the pressing cam realizes the precise positioning of the lower mold at the working position through the positioning rod and the positioning disc. There are lubricating pumps installed in the left and right sides of the chassis, which pass through when the machine is working, and the oil pipes deliver lubricating oil to the frictional moving parts. Those who understand the structure, performance and operating procedures of the machine are not allowed to start the machine.
It is strictly forbidden for the tile press to work beyond the minimum closing height, that is, the minimum distance from the bottom of the upper sliding box to each working surface is 290mm, which requires the height behind the upper and lower molds plus the thickness of the upper and lower backing plates plus the thickness of the tile blank. It is not allowed to exceed 290mm. When manufacturing molds, design should be carried out according to this requirement to avoid machine tool accidents.
  Often pay attention to observe the height of lubricating oil in the sliding box and the body on both sides. The equipment should be wiped frequently and kept clean without muddy water.