Instructions for use of vehicle-mounted high-altitude tile press

Instructions for use of vehicle-mounted high-altitude tile press

Instructions for use of vehicle-mounted high-altitude tile press
1. When using a vehicle-mounted high-altitude tile press, it is strictly prohibited to carry out the tile operation without the legs being extended or not supported in place. The equipment must not be moved when the equipment is producing tiles at high altitude, otherwise it may cause an accident. occur. When operating high-altitude tile press equipment, you must use circuits that meet the requirements and operate within a limited load capacity. You are not allowed to install or change equipment on the tile press platform without permission to avoid malfunctions.
  2. When the vehicle-mounted high-altitude tile press is inspected while it is in the lifted state, the platform must be fixed on a building of the same height to prevent the tile press platform from accidentally sliding down and causing personal accidents. Personnel who have not been trained by the manufacturer are not allowed to dismantle the equipment without authorization, and the pressure should be vented before disassembling the hydraulic system.
3. During the lifting process of the vehicle-mounted high-altitude tile press, the operator should pay attention to the height of the equipment from the objects above and the surrounding environment to avoid collision with wires or buildings. When performing high-altitude tile press operations, the wind force should not be greater than level 6. , and no one should be allowed to approach within two meters to avoid being injured by falling objects from high altitude.
 4. If the vehicle-mounted high-altitude tile press makes abnormal noise or jitters during operation, it should be stopped immediately for inspection, and the cause can be found before continuing to run to avoid damage to the equipment and staff. After the high-altitude tile press equipment operation is completed, the platform should be moved to the designated position, the power of the equipment should be turned off, and all legs should be folded before transportation.
 5. During the lifting process of the vehicle-mounted high-altitude tile press, designate a dedicated person to take charge and provide unified command. During the operation of the high-altitude tile press, no one is allowed to stand and instructions are given. Installation workers should follow the requirements for high-altitude operations, wear hats, shoes, laces, and do not wear overly loose clothing, and must not exceed the height limit. A dedicated person must be responsible for operating the remote control of the high-altitude tile press. Abnormal operation during work is prohibited, random manipulation by non-operators is prohibited, and overload operation of the high-altitude tile press platform is prohibited.